MACHINE DESCRIPTION:

Turnstile press TH6 is determined for edge glueing, especialy for boards and desks. It is welded construction. Star rotor with 6 working tables is mounted in bearings in fixed frame. On each of 6 tables there are installed adjustable pressing units with upper clamping beam. Source of the pressure is electro hydraulic pump. Controling of the cylinders is described below. Rotor turning is manual or automatic by gearbox.

TECHNICAL PARAMETERS:

MACHINE MODEL	TH6 L/750/T-NC-TR	TH6 D/1050/T-NC-TR	TH6 D/1250/T-NC-TR
Machine length	-	-	-	mm
Machine width	dle typu	dle typu	dle typu	mm
Machine height	-	-	-	mm
Weight	-	-	-	kg
Glueing length	2 000 - 4 000	2 000 - 4 000	2 000 - 4 000	mm
Glueing height	750	1050	1250	mm
Material thickness	15 - 50 (40 - 90)	15 - 50 (40 - 90)	15 - 50	mm
Pressure	4 - 20	4 - 20	4 - 20	kg / cm2
Cylinders in 1 table	4 - 20	4 - 20	4 - 20	ks
Cylinder stroke	90	90	90	mm
Cylinder pressure	2000 / 4 000	2000 / 4 000	2000	kg
Hydr. circuit pressure	4 - 20	4 - 20	4 - 20	MPa
Elektrohydraulic pump	1,1 - 3	1,1 - 3	1,1 - 3	kW
Average productivity	12 - 15	12 - 15	12 - 15	tables / hour
Rotor turning	manual / automatic	manual / automatic	manual / automatic	-
Turning gearbox power	1,1 - 1,5	1,1 - 1,5	1,1 - 1,5	kW
Electricity protection	IP 54	IP 54	IP 54	IP
Voltage	3 x 400	3 x 400	3 x 400	V

* explanations
L = glueing length; T = glueing thickness; NC = nr. of cylinders in 1 table; TR = rotor turning

• Control options

  +

  A) WORKING ZONES

  
  

  In standard varaint the whole pressing table is divided to 2 or 3 working zones. In the picture you can see 6 pressing units divided into 3 zones. Each zone has got own central stop ball valve (numbers 1, 2 and 3). If we glue only shorter material we close valve nr. 1 and we work only on zones controlled by valves 2 and 3.

  
  
  

  B) EACH CYLINDER CONTROLLED BY STOP BALL VALVE

  
  

  In this variant we can choose how many cylinders we want to use for glueing. Each cylinder has got own stop ball valve and we can use it or not. Cylinders, which are open we control by central valve. For exemple: If we want to glue on first 2 cylinders we close other cylinders by stop ball valves. After pressurized on first 2 cylinders we close first 2 cylinders to pressure stay there. Then we can open remaining cylinders and central stop ball valve and continue in glueing on the other cylinders.

  

• Automatic rotor turning

  +

  Machinery from TH line are in basic variant turning by hoops. You can order automatic turning by gearbox like accessories.