MACHINE DESCRIPTION:

Turnstile press TH3 is welded construction. Rotor with 3 working tables is installed in bearing houses in machine frame. On each working table there are mounted pressing units with upper clamping beams. Pressing units are adjustable in axis X. Pressure source is electrohydraulic pump. Rotor turning is doing manually by hoops or automatically by gearbox.

TECHNICAL PARAMETERS:

Machine model	TH3	TH3
Machine length	-	-	mm
Machine width	-	-	mm
Machine height	-	-	mm
Weight	-	-	kg
Glueing length	2 000 - 6 000	2 000 - 6 000	mm
Glueing height	1 050	1 250	mm
Material thickness	15 - 50 (40 - 90)	15 - 50 (40 - 90)	mm
Pressure	4 - 18	4 - 18	kg / cm2
Cylinders in 1 table	4 - 20	4 - 20	pcs
Cylinder stroke	90	90	mm
Cylinder pressure	2 000 (4 000)	2 000 (4 000)	kg
Hydr. circuit pressure	4 - 20	4 - 20	MPa
Elektrohydraulic pump	1,1 - 4	1,1 - 4	kW
Average productivity	6 - 9	6 - 9	tables / hour
Rotor turning	manual (automatic)	manual (automatic)	-
Turning gearbox power	1,1 - 1,5	1,1 - 1,5	kW
Electrcity protection	IP 54	IP 54	IP
Voltage	3 x 400	3 x 400	V

• Thin layers glueing

  +

  ACCESSORIES FOR THIN LAYERS

  
  

  When you glue thin parts of boards or solid panel layers, it is possible to equipped machine TH3 with "VENEER CLAMPS" which hold the material straight during glueing.

  

• Control options

  +

  A) WORKING ZONES

  
  

  In standard varaint the whole pressing table is divided to 2 or 3 working zones. In the picture you can see 6 pressing units divided into 3 zones. Each zone has got own central stop ball valve (numbers 1, 2 and 3). If we glue only shorter material we close valve nr. 1 and we work only on zones controlled by valves 2 and 3.

  
  
  

  B) EACH CYLINDER CONTROLLED BY STOP BALL VALVE

  
  

  In this variant we can choose how many cylinders we want to use for glueing. Each cylinder has got own stop ball valve and we can use it or not. Cylinders, which are open we control by central valve. For exemple: If we want to glue on first 2 cylinders we close other cylinders by stop ball valves. After pressurized on first 2 cylinders we close first 2 cylinders to pressure stay there. Then we can open remaining cylinders and central stop ball valve and continue in glueing on the other cylinders.

  

• Automatic rotor turning

  +

  Machinery from TH line are in basic variant turning by hoops. You can order automatic turning by gearbox like accessories.

  

• Adjustable working height

  +

  Machine is produced in 2 standard glueing heights 1050 mm and 1250 mm. When you need to glue closer dimensions without filling working space with dry lamellas we offer adjustable supports. Pressing height is than adjustable after 80 mm raster.