Menu
CZ | EN | DE | RU | ES | FR

glueing solid wood panels

  • alt text

Turnstile press for solid glulam panels



TH6

MACHINE DESCRIPTION:

Turnstile press TH6 is determined for edge glueing, especialy for boards and desks. It is welded construction. Star rotor with 6 working tables is mounted in bearings in fixed frame. On each of 6 tables there are installed adjustable pressing units with upper clamping beam. Source of the pressure is electro hydraulic pump. Controling of the cylinders is described below. Rotor turning is manual or automatic by gearbox.

TECHNICAL PARAMETERS:

MACHINE MODEL TH6 L/750/T-NC-TR TH6 D/1050/T-NC-TR TH6 D/1250/T-NC-TR
Machine length - - - mm
Machine width dle typu dle typu dle typu mm
Machine height - - - mm
Weight - - - kg
Glueing length 2 000 - 4 000 2 000 - 4 000 2 000 - 4 000 mm
Glueing height 750 1050 1250 mm
Material thickness 15 - 50 (40 - 90) 15 - 50 (40 - 90) 15 - 50 mm
Pressure 4 - 20 4 - 20 4 - 20 kg / cm2
Cylinders in 1 table 4 - 20 4 - 20 4 - 20 ks
Cylinder stroke 90 90 90 mm
Cylinder pressure 2000 / 4 000 2000 / 4 000 2000 kg
Hydr. circuit pressure 4 - 20 4 - 20 4 - 20 MPa
Elektrohydraulic pump 1,1 - 3 1,1 - 3 1,1 - 3 kW
Average productivity 12 - 15 12 - 15 12 - 15 tables / hour
Rotor turning manual / automatic manual / automatic manual / automatic -
Turning gearbox power 1,1 - 1,5 1,1 - 1,5 1,1 - 1,5 kW
Electricity protection IP 54 IP 54 IP 54 IP
Voltage 3 x 400 3 x 400 3 x 400 V

* explanations
L = glueing length; T = glueing thickness; NC = nr. of cylinders in 1 table; TR = rotor turning


  • Control options

    +

    A) WORKING ZONES


    In standard varaint the whole pressing table is divided to 2 or 3 working zones. In the picture you can see 6 pressing units divided into 3 zones. Each zone has got own central stop ball valve (numbers 1, 2 and 3). If we glue only shorter material we close valve nr. 1 and we work only on zones controlled by valves 2 and 3.



    B) EACH CYLINDER CONTROLLED BY STOP BALL VALVE


    In this variant we can choose how many cylinders we want to use for glueing. Each cylinder has got own stop ball valve and we can use it or not. Cylinders, which are open we control by central valve. For exemple: If we want to glue on first 2 cylinders we close other cylinders by stop ball valves. After pressurized on first 2 cylinders we close first 2 cylinders to pressure stay there. Then we can open remaining cylinders and central stop ball valve and continue in glueing on the other cylinders.

  • Automatic rotor turning

    +

    Machinery from TH line are in basic variant turning by hoops. You can order automatic turning by gearbox like accessories.

Video